These needles have been designed for rapid and regular application of medium to high viscosity fluids or particulate-laden products.
Poly Dispensing Systems ™ tapered tips allow the rapid and regular application of medium to high viscosity fluids or particulate-laden products such as epoxy, RTV silicones and even solder pastes.
The precision cone allows the fluid to flow without obstruction, thus limiting filaments and seeps.
Polyethylene molding is used to block ultraviolet light.
They are available in boxes of 50 with batch number or bulk pack of 1000.
| Gauge | Color | DI | Flexible | Rigid |
|
14G
|
 Olive |
1,55 mm (0,061?) |
Z520114
|
Z580114
|
|
16G
|
 Grey |
1,19 mm (0,046?) |
Z520116
|
Z580116
|
|
18G
|
 Green |
0,84 mm (0,033?) |
Z520118
|
Z580118
|
|
20G
|
 Pink |
0,61 mm (0,024?) |
Z520120
|
Z580120
|
|
22G
|
 Blue |
0,41 mm (0,016?) |
Z520122
|
Z580122
|
|
25G
|
 Red |
0,25 mm (0,010?)
|
Z520125
|
Z580125
|
|
27G
|
 Transparent |
0,20 mm (0,008?)
|
Z520127
|
Z580127
|
The general purpose needles are available in lengths of 6.35 mm, 12.7 mm, 25.4 mm and 38.1 mm with internal diameters of 1,54 mm to 0,10 mm.
These needles are recommended for depositing low viscosity fluids.
These needles have been designed for rapid and regular application of medium to high viscosity fluids or particulate-laden products.
Angled stainless steel tips are available in 45° and 90° bends.
The polypropylene cannulas can be cut to the desired length and allow access to areas that are difficult to access.
These needles allow you to remove pasty products such as mastics and epoxies in flat cords.
The conical shape of the precision needles allows the fluid to flow more easily, with very small and progressive pressure drops.
Also known as brush needles, these needles allow us to deposit glues and / or greases in hard or soft bristles and for large or small flows.
