Exactablend AGP (Advanced Glazing Proportioner), advanced dosing unit for mastic and two component adhesives
Report of accurate and well dispensed dispensing
With the Exactablend AGP system, all the product dispensed is mixed properly. This is because the system continuously monitors the flow rate of the base material and automatically adjusts the flow rate of the hardener, allowing accurate dispensing even when the pump is reversed. A mixture that cures evenly and without defects. This reduces the risk of breakage of the insulating glass seal and ensures better quality of the final products.
Optimal mixture
For quality assurance. With the AGP U100, all the product dispensed is mixed properly; better mixing results in a product that cures evenly and without defects.
Easy functioning
Compared to traditional dispensers with mechanical coupling and swing arms, the electronic controls of the AGP U100 system take the guesswork out of setting the dosing ratios and make it easy to change them. In contrast to traditional dosing units with mechanical coupling and swing arms, the electronic controls of the system take the guesswork out of setting the dosage ratio.
– Quick and easy setup
– the operator simply enters the desired Base/Hardener ratio
– Very easy to change
Guarantee of reports of accurate dispensing
A simple glance at the green light, now available by default, is all it takes to let the operator know that the products are being dispensed at the specified dosages. In case of wrong dosage, the system stops automatically.
Loss produces reduced
Rinsing the base of the AGP U100 is simple and reduces product loss. Rinsing the base is quick, clean and easy. It is done at the touch of a button. When the ExactaBlend AGP is coupled with the MD2 valve, the base and hardener are mixed in the mixer at the applicator outlet. This greatly reduces the amount of base purge required to clean the mixer. In addition, using the MD2 valve prevents damage to the applicator and hoses if the material has dried. Basic purging is quick, clean and easy. You simply need to press a button